No products in the cart.
Fire Protection
-
Bullard LTXRD
FEATURES
– M-Pact Shell -SmartRidge design
Download Datasheet
– High Heat thermoplastic outer shell
– Hard coated high heat thermoplastic material face shield- meets ANSI Z87.1-2003 standard for eye and face protection
– Comfortable Sure-Lock ratchet headband
– Balanced 4-point nylon crown straps and crown pad
– Nomex chinstrap with quick-release buckle comfortable and fire resistant/postman slide
– Black Rip stop Nomex Ear/Neck Protector
– Leather Ratchet Cover
– Removable Fire resistant, absorbent cotton brow pad
– Quick Attach Face shield
– Certified to NFPA 1971, 2007 standard -
BullDozer Fireman Suit
FEATURES
– Bulldozer Fireman Suit – comfortable and advance fire fighter suits
– Clothing -consist of Jacket and Trouser with insulation layer with retro reflective trims.
– Cotton Fabric 100% – DI 150/2/0N assigned for protective fireman clothing, non inflammablefinish (Pyrpvctex)
Download Datasheet
– Water Proof, oil proof and surface mass 270gsm
– fabric made in CIBA- GEIGY technology
– ISO 9001 and ISO 14001 Quality certificates
– Conformance: EN 469 after 5 washings including penetration tests
– EC marking made on the inside inner line of Jacket and upper part of back trousers
– Sizes:(48-Medium),(50-Large)(52-Large),(54-XLarge), (56-XLarge), (60-2XLarge) , (62-3XLarge) -
Chiba Fire Shark Long
FEATURES
– Eurotex- membrane (windproof, waterproof and breathable) – Padding in the finger area
– Cuff width adjustable
– 3M reflective stripes on the cuff eyelets– Siliconised double-face knit patch
Download Datasheet
– Palm hand made of Nappa-leather
– Top hand and cuff made of Carbon X -
Chiba RESCUE II
FEATURES
– Backhand: fire resistant – Nappa leather
– Palmhand: fire resistant – Nappa leather– Gauntlet: Split leather
– Finger liner: 100 PRESENT Twaron – knitted fabric
– Gauntlet liner: PRESENT Nomex
– 30 PRESENT Viscose
– Waterproof Breathable:
– 6.000 mm water column,
Download Datasheet -
Chiba top RESCUE
FEATURES
– A knuckle protector and a breathable, waterproof and blood borne pathogen proof insert. – Double face knitted, silicon bonded Kevlar Top- and Palm hand
Download Datasheet
– Guarantees a perfect grip and is flexible enough to offer a very good dexterity.
– 60% Meta-Aramid, 40% Kevlar
– Gauntlet: 50% Nomex – 50% Viscose -
Cofra NO FLAME
FEATURES
– STANDARD: EN 15090:2012 – EN ISO 17249:2013
– UPPER: full grain fireproof and water repellent leather with cut protection
– EXTERNAL LINING: breathable leather
– INTERNAL LINING: COFRA-TEX WATERPROOF UNIVERSAL membrane with WATERPRO-TECH construction system
– FOOTBED: HEAT BARRIER, made of soft and scented polyurethane, antistatic, anatomic, insulating against high temperatures, covered with cloth. The thermal comfort inside the footwear is granted thanks to the special polyurethane compound devised to give high insulation
– SOLE: fully made of nitrile rubber resistant to +300 °C (1 minute contact)
– TOE CAP: steel resistant to 200 J
– MIDSOLE: non metallic APT PLATE – Zero Perforation
– WIDTH: 12 Mondopoint
– PLUS: fire resistant aramid laces, footwear with chainsaw cut protection, leather pull-on loop,Nitrile rubber toe cap protection , padded back area, quick release with easy grab zip puller,
side reflex bands for high visibility, triple and quadruple fireproof stitchings
– PERFORMANCES AND TECHNICAL FEATURES: Cold Protection (CI), Heat Resistant (HI), HRO,Italian Leather, saw and chain protection, toe cap protection, Water Resistant, with zip – SUGGESTED USAGE: footwear for firemen , footwear for forest fire
Download Datasheet
– SIZES: 38-48 (EU), 5-13 (UK) -
Cofra Sprinkler
FEATURES
– STANDARD: EN 15090:2012
– UPPER: full grain fireproof and water repellent leather
– EXTERNAL LINING: breathable leather
– INTERNAL LINING: COFRA-TEX WATERPROOF UNIVERSAL membrane with WATERPRO-TECH construction system
– FOOTBED: HEAT BARRIER, made of soft and scented polyurethane, antistatic, anatomic, insulating against high temperatures, covered with cloth. The thermal comfort inside the footwear is granted thanks to the special polyurethane compound devised to give high insulation
– SOLE: fully made of nitrile rubber resistant to +300 °C (1 minute contact)
– TOE CAP: steel resistant to 200 J
– MIDSOLE: non metallic APT PLATE – Zero Perforation
– WIDTH: 12 Mondopoint
– PLUS: fire resistant aramid laces, Nitrile rubber toe cap protection , padded back area, quickrelease with easy grab zip puller, rear leather pull up loop, side reflex bands for high visibility,
triple and quadruple fireproof stitchings
– PERFORMANCES AND TECHNICAL FEATURES: Cold Protection (CI), Heat Resistant (HI),Italian Leather, toe cap protection, Water Resistant, with zip
Download Datasheet
– SUGGESTED USAGE: footwear for firemen , footwear for forest fire – SIZES: 40-48 (EU), 61⁄2-13 (UK) -
ETCHE SECURITE FIREMAN SA BOOTS-TYPE 3
Descriptions/Features
- Heel shock absorption.
- Antistatic.
- Resistance to heat contact (HRO). EN 13832-3 J P Q
- Boots highly resistant to chemicals :
- N-Heptane (J)
-
HARVIK FIREFIGHTER BOOTS 9687L
FEATURES
– Knee-high firefighter boot with rubber upper featuring pull-on loops – Steel toe and plate
– Sole: Rubber
– Closure: Slip-On– Shoe Width: D(M) mens_us
Download Datasheet
– NFPA 1971-2013 protective footwear for structural fire fighting
– Safety reflective path on side of boot
– Non-woven Kevlar nomex lining with flame-retardant properties -
Jutec Aluminized Heat Protection Apron
Description/Features
- Heat resistant aluminized apron
- full frontal protection
- Retaining clips
-
Jutec Aluminized Heat Protection Coat
Descriptions/Features
- Made of heat resistant fabric with aluminized high vacuum coating
(KA-1, KA-2, KA-3 or KA-9/POA). - Available in chest sizes: S – 4XL.
- Made of heat resistant fabric with aluminized high vacuum coating
-
Jutec Aluminized Heat Protection Gaiters
Descriptions/Features
- Heat protection gaiters with insulated metal strips over the instep. Individually adjustable to shoe, increased stability and comfort.
- Heat resistant Velcro fastening at rear of shaft.
-
Jutec Aluminized Heat Protection Jacket
Description/Features
Heat Protection Coat
- Made of heat resistant fabric with aluminised high vacuum coating.
(KA-1, KA-2, KA-3 or KA-9/POA). - Available in chest sizes: S – 4XL.
- Made of heat resistant fabric with aluminised high vacuum coating.
-
Jutec Aluminized Heat Protection Trousers
Description/Features
Heat Protection Trousers
- Made of heat resistant fabric with aluminised high vacuum coating
(KA-1, KA-2, KA-3 or KA-9/POA). - Available in waist sizes: S – 4XL
- With waist fastener and belt loop, no pockets
- Made of heat resistant fabric with aluminised high vacuum coating
-
Jutec Glove Made Of Glass Fabric With Silicone Coating
Descriptions/Features
- Abrasion-resistant and non-slip
- Flexible
- Excellent handling properties
- Lengths 30cm and 38cm
-
Jutec Glove Made Of Sebatan Leather Aluminized
Description/Features
- Abrasion-resistant
- Flexible aluminizing
- Soft
- Excellent handling
-
Jutec Heat Protection Hood With Aluminum Farme
Descriptions/Features
- For head, throat, neck and chest protection
- With integrated aluminum frame (150 x 250 mm)
- Suitable for clear and gold-vaporized visors
-
MSA GALLET F1 XF HELMET
FEATURES
– Ergonomic, well balanced design, providing unmatched comfort in all operating conditions – 2 helmet sizes ensuring an optimal fit for both small and large head sizes
– Effective, intuitive and robust adjustment mechanisms, ensuring optimal fit for all userprofiles
– Comfortable, high-performance face protection with excellent coverage, clear or gold coating
– Extended thermal and mechanical protection even in extremely hot conditions
– Fully integrated lighting module with unique distribution of light and weight, supportingwork and safe navigation in the dark
– Optimized care and maintenance procedures, leading to reduced cost of ownership and saferuse
Download Datasheet
– State-of-the-art integration of helmet mounted headset for easier communication
– Unique customization capabilities with interchangeable front plate and personnalized molded or printed badge
– This helmet is produced on order +/- 6 weeks -
POLYCARBONATE VISORS
Descriptions/Features
– Designed for use with V-Gard Frames and V-Gard Headgear
Download Datasheet
– Sides are contoured towards face for a closer fit and improved resistance to impact and splash hazards
– Can be worn with helmet-mounted ear muffs -
Promax Fx Nomex Fighter Suit
Descriptions/Features
- Twill Weave.
- Moisture Barrier: FR Non Woven Nomex/Kevlar Coated PTFE Membrane.
- Thermal Barrier: FR Non Woven Nomex/ Kevlar Quilted To FR Face Cloth.
- Sewing Thread: All Sewing Thread is Nomex Thread.